Projects per year
- 1 - 50 out of 118 results
Search results
-
Collaborative Project
Development and Characterisation of Sustainable Novel Aluminium Metal Matrix Composite for Industrial Applications in the GCC region
Ramanathan, A.
1/1/17 → 12/31/19
Project: Collaborative Project
-
-
Implementation plan for revision and updating of existing regulation and legislation on control and monitoring of ODS
Al-Suleiman, S.
1/1/04 → 12/31/04
Project: Collaborative Project
-
Customer satisfaction survey for electricirty consumers in Oman
Al-Suleiman, S.
1/1/09 → 12/31/09
Project: Collaborative Project
-
SUSTAINABLE AND LOW-COST DEVELOPMENT OF ALUMINIUM NANOCOMPOSITES THROUGH A NOVEL STIR CASTING APPROACH
Ramanathan, A.
8/5/22 → 8/5/24
Project: Collaborative Project
-
A Novel GelMA Hydrogel based Microfluidic Blood-Brain Barrier Prototype for in vitro Studies of Cancer Metastasis
1/1/17 → 12/31/19
Project: Collaborative Project
-
Design and Development of Ultrasonically Assisted Bone Surgical Tools for Minimal Invasive Surgeries
Alam, K. & Mahdi, E.
7/3/24 → 7/3/26
Project: Collaborative Project
-
A feasibility design study of a novel evaporative air cooler for space cooling for the Sultanate of Oman
1/1/08 → 12/31/08
Project: Collaborative Project
-
Non-invasive method for early detection of Heart failure from MEMS based Biomedical sensors
6/21/20 → 5/20/22
Project: Collaborative Project
-
A Hybrid Nonlinear Vibration Energy Harvester for Remote Sensing Applications
9/6/21 → 12/31/21
Project: Collaborative Project
-
External Grants
Experimental Investigation of using Nanoparticles to Enhance Oil Recovery
1/1/21 → 12/31/22
Project: External Grants
-
Additive Manufacturing (3D Printing) and Optimization of Novel High-Energy Absorbing Composite Structures made from the Locally Produced Polypropylene
9/1/20 → 12/31/23
Project: External Grants
-
Utilizing solar energy for power production using parabolic trough with organic Rankine cycle
1/1/19 → 12/31/22
Project: External Grants
-
HM Grants ( Strategic)
Experimental setup for performance evaluation and commercial scale synthesis of nano enhanced drilling fluids
Abdo, J.
1/1/13 → 12/31/15
Project: HM Grants ( Strategic)
-
Development of Fishing Trap Degradable Device for Prevention/Reduction of Ghost Fishing in Oman
Abdo, J.
1/1/15 → 12/31/16
Project: HM Grants ( Strategic)
-
Enhance Extend Reach Drilling Operations by Utilizing Synthesized Clays Nanoparticles in Drilling Fluids for Improved Oil and Gas Recovery
Abdo, J.
1/1/16 → 12/31/19
Project: HM Grants ( Strategic)
-
verification audit for the phase-out management plan(HPMP) of Hydrochlorofluorocarbons(HCFCs) in Oman
Al-Suleiman, S.
1/1/14 → 12/31/15
Project: HM Grants ( Strategic)
-
-
Internal Grants (IG)
Smart wells technology for oil production optimization in Oman
Abdo, J.
1/1/07 → 12/31/07
Project: Internal Grants (IG)
-
The design and construction of a nano and micro scale pin-on-disc testing machine
Abdo, J.
1/1/09 → 12/31/09
Project: Internal Grants (IG)
-
Nano-enhanced drilling fluids: Synthesis, testing by developed setup and optimization for improved performance
Abdo, J.
1/1/11 → 12/31/11
Project: Internal Grants (IG)
-
Analyzing the effect of Supply Chain Complexity on Supply Chain performance: Perspective from Omani Industries
Piya, S.
1/1/21 → 12/31/22
Project: Internal Grants (IG)
-
Performance Evaluation of High-Density Polyethylene Micro/Nano Hydroxyapatite Composites for Biomedical Implants: An Experimental and Numerical Study.
1/1/24 → 12/31/25
Project: Internal Grants (IG)
-
Design and Fabrication of Self-Sensing Magnetostrictive Transducer for Non-Destructive Evaluation
Ghodsi, M.
1/1/15 → 12/31/16
Project: Internal Grants (IG)
-
Mediator Based Order Acceptance Decision System for Make-to-Order Company
Piya, S.
1/1/14 → 12/31/14
Project: Internal Grants (IG)
-
Structural Vibration Control Using Magnetostrictive Actuators
Ozer, A.
1/1/17 → 12/31/19
Project: Internal Grants (IG)
-
A statistical approach for the minimization of energy and maintenance cost for a typical educational facility.
1/1/17 → 12/31/19
Project: Internal Grants (IG)
-
Optimal Design Configuration of an Organic Rankine Cycle Using Waste Heat and Solar Energy in Hot Arid Areas
1/1/13 → 12/31/15
Project: Internal Grants (IG)
-
-
Development of Precise Sensorless Piezo-actuated Nanopositioning Systems
1/1/18 → 1/31/20
Project: Internal Grants (IG)
-
A Mercury-Free, Piezo-Assisted Micro-Cutter for Embryo Biopsy
1/1/16 → 12/31/17
Project: Internal Grants (IG)
-
A fuzzy logic-based navigation of a remotely operated vehicle
1/1/05 → 12/31/05
Project: Internal Grants (IG)
-
Micromechanical Modeling of Mechanical Behavior and Strength of Cellular Solids
1/1/11 → 12/31/11
Project: Internal Grants (IG)
-
The characterization of progressive damage in polymer concrete composites
1/1/08 → 12/31/08
Project: Internal Grants (IG)
-
Design and development of high performance concentrated solar collectors using passive and optical enhancement methods and nanofluids carrying absorber
1/1/21 → 12/31/23
Project: Internal Grants (IG)
-
Preparation And Charaterization Of Gas Separation And Purification Membranes
1/1/12 → 12/31/17
Project: Internal Grants (IG)
-
Solid-state recycling of Magnesium alloys through consolidation of Magnesium chips using Equal Channel Angular Extrusion
Al-Maharbi, M., Ramanathan, A. & Qamar, S. Z.
1/1/15 → 4/30/18
Project: Internal Grants (IG)
-
Development of an Environmentally-Adapted Wheelchair: Toward More Independence for Disabled and Elderly People in Oman
Goher, K.
1/1/12 → 12/31/12
Project: Internal Grants (IG)
-
Elevated inversion layers and the Al-Khareef season in Salalah
Al-Suleiman, S.
1/1/03 → 12/31/03
Project: Internal Grants (IG)
-
An experimental study of solar stills under Omani climatic conditions: inverted absorber solar stills for production of fresh water in remote areas
Al-Suleiman, S.
1/1/08 → 12/31/08
Project: Internal Grants (IG)
-
Nano Enhanced Supercapacitor for Energy Storage (NESES)
Ramanathan, A.
1/1/13 → 12/31/15
Project: Internal Grants (IG)
-
Occupational health and safety issues affecting worker performance in Omani industries
Khadem, M.
1/1/10 → 12/31/14
Project: Internal Grants (IG)
-
Orchestrating the Omani National Innovation Ecosystem: An Agent-Based Modelling Approach
1/1/19 → 12/31/20
Project: Internal Grants (IG)
-
Study on Machinability of Nano Date Palm Particulate Bio-Composites
1/1/23 → 12/31/24
Project: Internal Grants (IG)
-
An experimental and computational study of different types of cyclone liquid-gas separators
1/1/08 → 12/31/08
Project: Internal Grants (IG)
-
Enhanced Prototype Design and Fabrication of a Foot Drop Stimulator Device for Locomotion Control
1/1/15 → 12/31/19
Project: Internal Grants (IG)
-
Design and Fabrication of Thermally Efficient Mold for the Compression Molding of Thermoplastic Polymers Produced in Oman
1/1/23 → 12/31/25
Project: Internal Grants (IG)
-
Experimental and Numerical Investigation of Bone Drilling
1/1/16 → 12/31/17
Project: Internal Grants (IG)