Projects per year
- 1 - 50 out of 123 results
Search results
-
Active
Techno-economic evaluation of low-energy and resilient cooling systems for the building sector in hot climates of Oman.
Al-Saadi, S. (PI), Murad Khan, H. (CoPI), Al-Khatri, H. (CoI), Zaier, R. (CoI) & Al-Azri, N. (CoI)
9/1/24 → 8/31/27
Project: Research project
-
Design and Development of Ultrasonically Assisted Bone Surgical Tools for Minimal Invasive Surgeries
Alam, K. (PI) & Mahdi, E. (PI)
7/3/24 → 7/3/26
Project: Collaborative Project
-
MEMS-based multi-sensor chip for health monitoring of oil piping in Oman
Zarog, M. (PI)
1/1/24 → 12/31/25
Project: MoHERI
-
Performance Evaluation of High-Density Polyethylene Micro/Nano Hydroxyapatite Composites for Biomedical Implants: An Experimental and Numerical Study.
Salim Moosa Al Kharusi, M. (PI)
1/1/24 → 12/31/25
Project: Internal Grants (IG)
-
E-Learning as a modern tool for optimizing learning outcomes in engineering education
Al Rawahi, N. (PI)
1/1/24 → 12/31/26
Project: Internal Grants (IG)
-
Design and Fabrication of Thermally Efficient Mold for the Compression Molding of Thermoplastic Polymers Produced in Oman
Khalfan Said Al-Obaidani, S. (PI)
1/1/23 → 12/31/25
Project: Internal Grants (IG)
-
Not started
-
Evaluating Industrial Impact of Funded Engineering Research in Oman
Zarog, M. (PI)
Project: Research project
-
Meteorological, Radiation and Environmental Mapping of the Sultanate of Oman for energy, Climate Change and Pollution Studies
Al-Azri, N. (PI)
Project: HM Grants ( Strategic)
-
Drilling Facility Design Modifications for Drill pipe Fatigue Failure Investigations
Abdo, J. (PI)
Project: MoHERI
-
-
Development and Experimental Characterization of Natural Fiber Polymeric Composites
Alzebdeh, K. (PI)
Project: Research project
-
Vibration-based Condition Monitoring of oil piping in Oman/Qatar
Zarog, M. (PI)
Project: Research project
-
Finished
Design, fabrication, experimental analysis, and optimization of PV and PV/T panels using artificial intelligence
Husain, A. (PI)
1/1/24 → 11/30/24
Project: MoHERI
-
Design and Fabrication of Hydrogen Storage Tanks from Petroleum-based Polymers Produced at Oman
Al Jahwari, F. (PI)
1/1/23 → 12/31/24
Project: Internal Grants (IG)
-
Study on Machinability of Nano Date Palm Particulate Bio-Composites
Al-Hinai, N. (PI)
1/1/23 → 12/31/24
Project: Internal Grants (IG)
-
solar-driven gasification of municipal solid waste for waste to value generation
Al Rawahi, N. (PI)
1/1/23 → 12/31/24
Project: MoHERI
-
SUSTAINABLE AND LOW-COST DEVELOPMENT OF ALUMINIUM NANOCOMPOSITES THROUGH A NOVEL STIR CASTING APPROACH
Ramanathan, A. (PI)
8/5/22 → 8/5/24
Project: Collaborative Project
-
Quality driven maintenance policies for a system subject to random deterioration and hidden failures
Bakir, N. O. (PI)
1/1/22 → 12/31/23
Project: Internal Grants (IG)
-
A Hybrid Nonlinear Vibration Energy Harvester for Remote Sensing Applications
Bait Bahadur, I. (PI)
9/6/21 → 12/31/21
Project: Collaborative Project
-
Design, fabrication, modelling and testing of microchannel-enhanced PV/T panel for electricity generation and water desalination
Husain, A. (PI)
1/12/21 → 11/30/22
Project: MoHERI
-
Analyzing the effect of Supply Chain Complexity on Supply Chain performance: Perspective from Omani Industries
Piya, S. (PI)
1/1/21 → 12/31/22
Project: Internal Grants (IG)
-
Experimental Investigation of using Nanoparticles to Enhance Oil Recovery
Joshi, S. (PI)
1/1/21 → 12/31/22
Project: External Grants
-
Hydrogen production using Nano-structured Electrodes
Al-Hajri, R. (PI), Al-Abri, M. (CoPI) & Al Rawahi, N. (CoI)
1/1/21 → 12/31/22
Project: Research project
-
Design and development of high performance concentrated solar collectors using passive and optical enhancement methods and nanofluids carrying absorber
Husain, A. (PI)
1/1/21 → 12/31/23
Project: Internal Grants (IG)
-
Design and fabrication o f vibration energy harvester
Zarog, M. (PI)
1/1/21 → 12/31/21
Project: Research project
-
Additive Manufacturing (3D Printing) and Optimization of Novel High-Energy Absorbing Composite Structures made from the Locally Produced Polypropylene
Al-Kindi, M. (PI)
9/1/20 → 12/31/23
Project: External Grants
-
Non-invasive method for early detection of Heart failure from MEMS based Biomedical sensors
Ouakad , H. (PI)
6/21/20 → 5/20/22
Project: Collaborative Project
-
Extended Life of Components through Advanced Nanostructured (ELCAN) Coatings for Engineering Applications
Al-Maharbi, M. (PI)
1/11/20 → 4/30/23
Project: MoHERI
-
Energy Efficient Scheduling in Manufacturing: Energy-Time Trade-off in Parallel Machine Environments
Gultekin, H. (PI)
1/1/20 → 12/31/21
Project: Internal Grants (IG)
-
Design, Fabrication and Experimental Modeling of Nanofluid-Enhanced Concentrating Solar Collector
Husain, A. (PI)
12/1/19 → 10/31/20
Project: MoHERI
-
Design of Thermal Storage System for the Solar Still Unit - Phase II
Al-Suleiman, S. (PI)
12/1/19 → 9/30/20
Project: MoHERI
-
Design and Development of a Sustainable Wind Turbine Under Volatile Wind Conditions: An Experimental and Numerical Study
Alam, K. (PI)
12/1/19 → 5/31/22
Project: MoHERI
-
Designing, Building, and Testing a vertical Axis Wind Turbine System
Al Rawahi, N. (PI)
12/1/19 → 1/28/21
Project: MoHERI
-
Development of Eco-Sustainable Natural Fiber Reinforced Bio-Composite Plastics for Industrial Applications in Oman
Alzebdeh, K. (PI)
9/1/19 → 8/31/21
Project: MoHERI
-
Composite Repair Qualification
Al Shabibi, A. (PI) & Al-Maharbi, M. (CoPI)
3/15/19 → 3/6/23
Project: Consultancy project
-
Orchestrating the Omani National Innovation Ecosystem: An Agent-Based Modelling Approach
Summad, E. (PI)
1/1/19 → 12/31/20
Project: Internal Grants (IG)
-
Utilizing solar energy for power production using parabolic trough with organic Rankine cycle
Al-Azri, N. (PI)
1/1/19 → 12/31/22
Project: External Grants
-
-
The Potential of Bio/Petro Polymeric Based Functionally Graded Porous Composites for Structural Applications
Al Jahwari, F. (PI)
1/1/18 → 12/31/20
Project: Internal Grants (IG)
-
Development of Precise Sensorless Piezo-actuated Nanopositioning Systems
Mohammadzaheri, M. (PI)
1/1/18 → 1/31/20
Project: Internal Grants (IG)
-
Design and Prototype of Stimulator Device to Enhance Locomotion of Human with Foot Drop Problem
Zaier, R. (PI)
1/1/18 → 12/31/20
Project: Other project
-
Investigation of Blood Flow across Stenosis in an Artery
Jagirdar, S. (PI)
1/11/17 → 10/31/19
Project: Internal Grants (IG)
-
Development and Characterisation of Sustainable Novel Aluminium Metal Matrix Composite for Industrial Applications in the GCC region
Ramanathan, A. (PI)
1/1/17 → 12/31/19
Project: Collaborative Project
-
Structural Vibration Control Using Magnetostrictive Actuators
Ozer, A. (PI)
1/1/17 → 12/31/19
Project: Internal Grants (IG)