Moisture sorption isotherm and thermal characteristics of freeze-dried tuna

Mohammad Shafiur Rahman, Mohammed Khalfan Al-Khusaibi*, Kutaila Abbas AL-Farsi, Ismail Mohamed Al-Bulushi, Aisha Abushelaibi, Nasser Al-Habsi

*المؤلف المقابل لهذا العمل

نتاج البحث: المساهمة في مجلةArticleمراجعة النظراء

4 اقتباسات (Scopus)


Water activity is considered an important factor in assessing the stability of food. Understanding the relationship between water activity and equilibrium moisture content (moisture sorption isotherm) benefits food processing in terms of modeling of drying and estimation of shelf life. In addition, glass transition helps to quantify molecular mobility which helps in determining the stability of food. The aim of this study was to determine the moisture sorption isotherm and thermal characteristics of freeze- dried tuna. These characteristics will help in determining the monolayer moisture and glassy state of the product, at which food is considered most stable. Moisture sorption isotherm at 20 °C and thermal characteristics (over a wide temperature range i.e. from -90 to 250 °C) of freeze-dried tuna flesh were measured. Isotherm data were modeled by BET (Brunauer-Emmett-Teller) and GAB (Guggenheim- Anderson{De Boer) models. The GAB and BET monolayer water values were determined as 0.052 and 0.089 g g -1 dry-solids (dry-basis), respectively. In the case of samples at moisture contents above 0.10 g g -1 (wet basis), DSC (Differential Scanning Calorimetry) thermograms showed two-step state changes (i.e. two glass transitions), one exothermic peak (i.e. molecular ordering) and another en- dothermic peak (i.e. solids-melting). However, the sample at moisture content of 0.046 g g -1 showed three-step state changes (i.e. three glass transitions). The multiple glass transition could be explained by the natural heterogeneity of tuna flesh and inhomogeneity due to molecular incompatibility of the different compositions. The moisture content did not affect the first glass transition temperature nor the exothermic peak (p > 0.05), whereas the third glass transition temperature decreased (i.e. plasti- cized) with increasing moisture content (p < 0.05). The solids-melting peak temperature decreased, and enthalpy increased with decreasing moisture content (p < 0.05).

اللغة الأصليةEnglish
الصفحات (من إلى)87-96
عدد الصفحات10
دوريةInternational Journal of Food Studies
مستوى الصوت8
رقم الإصدار1
المعرِّفات الرقمية للأشياء
حالة النشرPublished - 2019

ASJC Scopus subject areas

  • ???subjectarea.asjc.1100.1106???


أدرس بدقة موضوعات البحث “Moisture sorption isotherm and thermal characteristics of freeze-dried tuna'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا