The effect of silica on the peel adhesion of epoxidized natural rubber-based adhesive containing coumarone-indene resin

Imran Khan; B. T. Poh

doi:10.1080/03602559.2010.512321

The effect of silica on the peel adhesion of epoxidized natural rubber-based adhesive containing coumarone-indene resin

Imran Khan^*, B. T. Poh

^*Corresponding author for this work

Chemistry

Research output: Contribution to journal › Article › peer-review

15 Citations (Scopus)

Abstract

The peel strength of silica filled on two grades of epoxidized natural rubber (ENR), i.e., ENR 25 and ENR 50 adhesive were investigated using coumarone-indene as the tackifying resin. Toluene was used as the solvent throughout the study. Result shows that peel strength increases with increase in silica loading due to the concentration effect of the filler. Peel strength, however, shows maximum value at 40 phr silica for both ENR 25 and ENR 50 an observation that is attributed to the maximum wettability and compatibility of adhesive on the substrate.

Original language	English
Pages (from-to)	1356-1360
Number of pages	5
Journal	Polymer - Plastics Technology and Engineering
Volume	49
Issue number	13
DOIs	https://doi.org/10.1080/03602559.2010.512321
Publication status	Published - 2010

Keywords

Adhesion
Adhesive
Epoxidized natural rubber
Peel strength
Silica

ASJC Scopus subject areas

Materials Science (miscellaneous)
Chemical Engineering(all)
Polymers and Plastics
Materials Chemistry

Access to Document

10.1080/03602559.2010.512321

Cite this

@article{79301f6cacf24f1781e65864f035c957,

title = "The effect of silica on the peel adhesion of epoxidized natural rubber-based adhesive containing coumarone-indene resin",

abstract = "The peel strength of silica filled on two grades of epoxidized natural rubber (ENR), i.e., ENR 25 and ENR 50 adhesive were investigated using coumarone-indene as the tackifying resin. Toluene was used as the solvent throughout the study. Result shows that peel strength increases with increase in silica loading due to the concentration effect of the filler. Peel strength, however, shows maximum value at 40 phr silica for both ENR 25 and ENR 50 an observation that is attributed to the maximum wettability and compatibility of adhesive on the substrate.",

keywords = "Adhesion, Adhesive, Epoxidized natural rubber, Peel strength, Silica",

author = "Imran Khan and Poh, {B. T.}",

note = "Funding Information: The authors acknowledge the research grant (FRGS) provided by Universiti Sains Malaysia that has resulted in this article.",

year = "2010",

doi = "10.1080/03602559.2010.512321",

language = "English",

volume = "49",

pages = "1356--1360",

journal = "Polymer - Plastics Technology and Engineering",

issn = "0360-2559",

publisher = "Taylor and Francis Ltd.",

number = "13",

}

TY - JOUR

T1 - The effect of silica on the peel adhesion of epoxidized natural rubber-based adhesive containing coumarone-indene resin

AU - Khan, Imran

AU - Poh, B. T.

N1 - Funding Information: The authors acknowledge the research grant (FRGS) provided by Universiti Sains Malaysia that has resulted in this article.

PY - 2010

Y1 - 2010

N2 - The peel strength of silica filled on two grades of epoxidized natural rubber (ENR), i.e., ENR 25 and ENR 50 adhesive were investigated using coumarone-indene as the tackifying resin. Toluene was used as the solvent throughout the study. Result shows that peel strength increases with increase in silica loading due to the concentration effect of the filler. Peel strength, however, shows maximum value at 40 phr silica for both ENR 25 and ENR 50 an observation that is attributed to the maximum wettability and compatibility of adhesive on the substrate.

AB - The peel strength of silica filled on two grades of epoxidized natural rubber (ENR), i.e., ENR 25 and ENR 50 adhesive were investigated using coumarone-indene as the tackifying resin. Toluene was used as the solvent throughout the study. Result shows that peel strength increases with increase in silica loading due to the concentration effect of the filler. Peel strength, however, shows maximum value at 40 phr silica for both ENR 25 and ENR 50 an observation that is attributed to the maximum wettability and compatibility of adhesive on the substrate.

KW - Adhesion

KW - Adhesive

KW - Epoxidized natural rubber

KW - Peel strength

KW - Silica

UR - http://www.scopus.com/inward/record.url?scp=77958499242&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77958499242&partnerID=8YFLogxK

U2 - 10.1080/03602559.2010.512321

DO - 10.1080/03602559.2010.512321

M3 - Article

AN - SCOPUS:77958499242

SN - 0360-2559

VL - 49

SP - 1356

EP - 1360

JO - Polymer - Plastics Technology and Engineering

JF - Polymer - Plastics Technology and Engineering

IS - 13

ER -

The effect of silica on the peel adhesion of epoxidized natural rubber-based adhesive containing coumarone-indene resin

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this