TY - JOUR
T1 - Extractive desulfurization of liquid fuel with FeCl3-based deep eutectic solvents
T2 - Experimental design and optimization by central-composite design
AU - Gano, Zaharaddeen S.
AU - Mjalli, Farouq S.
AU - Al-Wahaibi, Talal
AU - Al-Wahaibi, Yahya
AU - AlNashef, Inas M.
N1 - Funding Information:
The authors appreciate the financial support of The Research Council and Sultan Qaboos University , Muscat Oman, under the project RC/ENG/PCED/12/02 .
Publisher Copyright:
© 2015 Elsevier B.V.
PY - 2015/7/1
Y1 - 2015/7/1
N2 - The extractive desulfurization of simulated fuel containing dibenzothiophene (DBT) and thiophene as sulfur compounds and commercial diesel was carried out using FeCl3-based deep eutectic solvent (DES). The study was conducted using the response surface method of experimental design technique, which aided in the modeling and optimization of the desulfurization process. High performance liquid chromatography (HPLC) was employed for the quantitative monitoring of the sulfur compounds in the fuel. The results showed that extraction efficiencies as high as 64% and 44% (for DBT and thiophene) could be achieved with the solvent in a single stage extraction, thus showing that the solvent has higher DBT removal than thiophene. Due to their observed extraction performances and zero solubility with the simulated fuel, the solvents were further used for the desulfurization of real commercial diesel and 32% total sulfur removal from the diesel was achieved. The work has not only shown that FeCl3-based DESs can be used in desulfurization of liquid fuels but also proved their desulfurization ability in the presence of multiple component fuel particularly the real commercial diesel fuel whose sulfur content was eventually lowered to below the environmental sulfur regulation in Oman. Finally, it was shown that the DESs were effectively regenerated and reused five times without significant decrease in their sulfur removal ability from both simulated fuel and commercial diesel.
AB - The extractive desulfurization of simulated fuel containing dibenzothiophene (DBT) and thiophene as sulfur compounds and commercial diesel was carried out using FeCl3-based deep eutectic solvent (DES). The study was conducted using the response surface method of experimental design technique, which aided in the modeling and optimization of the desulfurization process. High performance liquid chromatography (HPLC) was employed for the quantitative monitoring of the sulfur compounds in the fuel. The results showed that extraction efficiencies as high as 64% and 44% (for DBT and thiophene) could be achieved with the solvent in a single stage extraction, thus showing that the solvent has higher DBT removal than thiophene. Due to their observed extraction performances and zero solubility with the simulated fuel, the solvents were further used for the desulfurization of real commercial diesel and 32% total sulfur removal from the diesel was achieved. The work has not only shown that FeCl3-based DESs can be used in desulfurization of liquid fuels but also proved their desulfurization ability in the presence of multiple component fuel particularly the real commercial diesel fuel whose sulfur content was eventually lowered to below the environmental sulfur regulation in Oman. Finally, it was shown that the DESs were effectively regenerated and reused five times without significant decrease in their sulfur removal ability from both simulated fuel and commercial diesel.
KW - Deep eutectic solvents
KW - Desulfurization
KW - Extraction
KW - Ferric chloride
KW - Liquid fuels
KW - Response surface methodology
UR - http://www.scopus.com/inward/record.url?scp=84928557815&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84928557815&partnerID=8YFLogxK
U2 - 10.1016/j.cep.2015.04.001
DO - 10.1016/j.cep.2015.04.001
M3 - Article
AN - SCOPUS:84928557815
SN - 0255-2701
VL - 93
SP - 10
EP - 20
JO - Chemical Engineering and Processing - Process Intensification
JF - Chemical Engineering and Processing - Process Intensification
ER -