Mechanical and Industrial Engineering

Filter
Conference contribution

Search results

  • 2012

    A simulation based game approach for teaching operations management topics

    Costantino, F., Di Gravio, G., Shaban, A. & Tronci, M., 2012, Proceedings of the 2012 Winter Simulation Conference, WSC 2012. 6465028. (Proceedings - Winter Simulation Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    28 Citations (Scopus)

  • Control of biped robot joints' angles using coordinated Matsuoka oscillators

    Al-Busaidi, A. M., Zaier, R. & Al-Yahmadi, A. S., 2012, Artificial Neural Networks and Machine Learning, ICANN 2012 - 22nd International Conference on Artificial Neural Networks, Proceedings. PART 1 ed. p. 304-312 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 7552 LNCS, no. PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Design and fabrication of test facility for longevity testing of elastomer seals

    Qamar, S. Z., Pervez, T., Van De Velden, M. & Sanchez, F. J., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. p. 1727-1734 8 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3, no. PARTS A, B, AND C).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    4 Citations (Scopus)

  • Effects on plasticity and structural integrity of tube expansion

    Khan, R., Pervez, T. & Qamar, S. Z., 2012, ASME 2012 Pressure Vessels and Piping Conference, PVP 2012. p. 607-616 10 p. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • Evaluation of effective elastic mechanical properties of graphene sheets

    Alzebdeh, K. I., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. p. 1205-1210 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3, no. PARTS A, B, AND C).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Experimental study of the rheological behaviour of the algerian crude oil

    Meriem-Benziane, M., Abdul-Wahab, S. A., Douani, M. & Belhadri, M., 2012, 6th International Conference on Thermal Engineering Theory and Applications. (6th International Conference on Thermal Engineering Theory and Applications).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Fracture mechanics based life prediction of hollow extrusion dies

    Qamar, S. Z., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. p. 1719-1725 7 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3, no. PARTS A, B, AND C).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Growth of ZnO nanorods in clay matrix to ensure uniform dispersion in drilling fluids

    Danish Haneef, M. & Abdo, J., 2012, Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012. p. 652-655 4 p. (Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Minimizing the Makespan in flowshops with flexible operations

    Demirtas, H. H. & Gultekin, H., 2012, Proceedings - INCOM'12, 14th IFAC Symposium on Information Control Problems in Manufacturing. PART 1 ed. IFAC Secretariat, p. 1366-1370 5 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 14, no. PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Mitigate friction of coiled tubing by optimization and axial vibrations to facilitate extended reach drilling operations

    Haneef, M. D. & Abdo, J., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. p. 207-213 7 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 12).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    8 Citations (Scopus)

  • Modified nanoclays: An approach to stabilizing drilling fluids rheology at high temperature

    Abdo, J., Haneef, M. D. & Al-Swalhi, M., 2012, Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012. p. 757-760 4 p. (Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Optimum mandrel configuration for efficient down-hole tube expansion

    Pervez, T., Al-Abri, O. S., Qamar, S. Z. & Al-Busaidi, A. M., 2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012. p. 469-477 9 p. (ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Pathways towards sustainable manufacturing enterprises Ibrahim

    Garbie, H., 2012, 62nd IIE Annual Conference and Expo 2012. Institute of Industrial Engineers, p. 43-52 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • 2011

    Analytical and numerical solution for large plastic deformation of solid expandable tubular

    Alabri, O., 2011, Society of Petroleum Engineers - SPE Annual Technical Conference and Exhibition 2011, ATCE 2011. Society of Petroleum Engineers (SPE), p. 5178-5190 13 p. (Proceedings - SPE Annual Technical Conference and Exhibition; vol. 6).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    10 Citations (Scopus)

  • Bio-inspired locomotion controller design for legged robots

    Zaier, R., Sept 6 2011, Field Robotics - Proceedings of the 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2011. World Scientific, p. 615-622 8 p. (Field Robotics - Proceedings of the 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Design of a fully automated robotic spot-welding line

    Akturk, M. S., Tula, A. & Gultekin, H., 2011, ICINCO 2011 - Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics. p. 387-392 6 p. (ICINCO 2011 - Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • Effect of heat treatment on mechanical properties of expansion cone material

    Qamar, S. Z. & Pervez, T., Jan 1 2011, Society of Petroleum Engineers - International Petroleum Technology Conference 2012, IPTC 2012. International Petroleum Technology Conference (IPTC), (International Petroleum Technology Conference 2011, IPTC 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Field layout of glass reinforced epoxy pipeline - A practical approach

    Seibi, A. C., Pervez, T., Qu, X. & Khalaf, A., 2011, Composite Science and Technology. Trans Tech Publications Ltd, p. 285-290 6 p. (Key Engineering Materials; vol. 471-472).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Finite element analysis of tubular ovality in oil well

    Pervez, T. & Qamar, S. Z., 2011, Advances in Materials and Processing Technologies II, AMPT 2009. p. 1654-1659 6 p. (Advanced Materials Research; vol. 264-265).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    9 Citations (Scopus)

  • Full scale testing of fast swell packer for shallow aquifer applications

    Pervez, T., Qamar, S. Z., Al-Abri, O. S., De Velden, M. V., Al-Houqani, S. A. & Van Eijden, J., 2011, Society of Petroleum Engineers - SPE/IADC Middle East Drilling Technology Conference and Exhibition 2011, MEDT 2011. p. 640-648 9 p. (Proceedings of the SPE/IADC Middle East Drilling Technology Conference and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Measuring the agility level in petroleum companies

    Garbie, I. H., 2011, 61st Annual IIE Conference and Expo Proceedings. Institute of Industrial Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Nanoparticles for maturity and optimization of rheological properties of drilling fluids

    Abdo, J. & Danish Haneef, M., 2011, Advances and Trends in Engineering Materials and their Applications - Proceedings of AES-ATEMA'2011 8th International Conference. p. 93-99 7 p. (AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Nanoparticles - Its significance in drilling fluid development for enhance oil recovery

    Abdo, J. A., Haneef, M. D. & Al-Sharji, H. H., 2011, Proceedings of the IASTED International Conference on Unconventional Oil Technology, TECH 2011. p. 204-208 5 p. (Proceedings of the IASTED International Conference on Unconventional Oil Technology, TECH 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Normative approach to six sigma project selection

    Al Kindi, M., 2011, 2011 IEEE International Systems Conference, SysCon 2011 - Proceedings. p. 189-193 5 p. 5929041. (2011 IEEE International Systems Conference, SysCon 2011 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Post-expansion characterization of expandabletubular: Progress and challenges

    Pervez, T., Khan, R., Qamar, S. Z., Al-Jahwari, F. K., Sanchez, F. J. & Al-Abri, B., 2011, Society of Petroleum Engineers - SPE/IADC Middle East Drilling Technology Conference and Exhibition 2011, MEDT 2011. p. 571-579 9 p. (Proceedings of the SPE/IADC Middle East Drilling Technology Conference and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Citations (Scopus)

  • STICK- SLIP FRICTION MODELING IN TUBE EXPANSION

    Pervez, T., AlAbri, O., Qamar, S. Z. & Al-Hiddabi, S. A., 2011, 15th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", TMT 2011. p. 113-116 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Vibration analysis of thick arbitrarily laminated plates of various shapes and edge conditions

    Pervez, T., Al-Jahwari, F. K. S. & Seibi, A. C., 2011, Composite Science and Technology. Trans Tech Publications Ltd, p. 1177-1183 7 p. (Key Engineering Materials; vol. 471-472).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Water-in-diesel emulsion and its micro-explosion phenomenon-review

    Hagos, F. Y., Aziz, A. R. A. & Tan, I. M., 2011, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. p. 314-318 5 p. 6014903. (2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    51 Citations (Scopus)

  • Web-based technologies in power plant automation and SCADA systems: A review and evaluation

    Lahti, J. P., Shamsuzzoha, A. & Kankaanpää, T., 2011, Proceedings - 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011. p. 279-284 6 p. 6190537. (Proceedings - 2011 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2011).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    16 Citations (Scopus)
  • 2010

    Design for manufacturing systems complexity: A perspective approach

    Garbie, I. H. & Shikdar, A., 2010, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010. p. 751-762 12 p. (ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    7 Citations (Scopus)

  • Design of cone-launcher system for SET applications in well drilling

    AlAbri, O., 2010, Society of Petroleum Engineers - SPE Annual Technical Conference and Exhibition 2010, ATCE 2010. Society of Petroleum Engineers (SPE), p. 5894-5910 17 p. (Proceedings - SPE Annual Technical Conference and Exhibition; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Enhancing the performance of industrial firms through implementation of lean techniques

    Garbie, I. H., 2010, IIE Annual Conference and Expo 2010 Proceedings. Institute of Industrial Engineers

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    8 Citations (Scopus)

  • Finite element analyses of flexible end-plate connections between steel beams and columns at elevated temperatures

    Al-Jabri, K. & Al-Jahwari, F., 2010, Structures in Fire - Proceedings of the Sixth International Conference, SiF'10. p. 687-693 7 p. (Structures in Fire - Proceedings of the Sixth International Conference, SiF'10).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Importance of crystallographic texture of AZ31B on flow stress anisotropy and tension-compression asymmetry

    Al-Maharbi, M., Foley, D., Karaman, I., Beyerlein, I., Hartwig, K. T., Kecskes, L. J. & Mathaudhu, S., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. p. 445-450 6 p. (Magnesium Technology).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Nanoparticles: Promising solution to overcome stern drilling problems

    Abdo, J. & Haneef, M. D., 2010, Nanotechnology 2010: Bio Sensors, Instruments, Medical, Environment and Energy - Technical Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010. p. 635-638 4 p. (Nanotechnology 2010: Bio Sensors, Instruments, Medical, Environment and Energy - Technical Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    11 Citations (Scopus)
  • 2009

    A non-radioactive flow meter using a new hierarchical Neural network

    Meribout, M., Al-Rawahi, N., Al-Naamany, A., Al-Bimani, A., Al-Busaidi, K. & Meribout, A., 2009, 14th International Conference on Multiphase Production Technology. p. 65-78 14 p. (14th International Conference on Multiphase Production Technology).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • A vision for reconfiguring industrial organizations due to the globalrecession

    Garbie, I., 2009, 2009 International Conference on Computers and Industrial Engineering, CIE 2009. IEEE Computer Society, p. 646-651 6 p. 5223915. (2009 International Conference on Computers and Industrial Engineering, CIE 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    9 Citations (Scopus)

  • Behavior based control of a robotic based navigation aid for the blind

    Al Yahmadi, A. S., El-Dirdiri, A. B. E. T. & Pervez, T., 2009, Proceedings of the 11th IASTED International Conference on Control and Applications, CA 2009. p. 161-166 6 p. (Proceedings of the 11th IASTED International Conference on Control and Applications, CA 2009).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Impact of surface treatment on the fouling of modified heat transfer surfaces

    Malayeri, M. R., Al-Janabil, A. & Müller-Steinhagen, H., 2009, Proceedings of the 17th IFHTSE Congress. The Japan Society for Heat Treatment (JSHT), p. 288-291 4 p. (Proceedings of the 17th IFHTSE Congress; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Solution of a non-linear heat conduction problem in automotive clutch and brake systems

    Al-Shabibi, A. M., 2009, Proceedings of the ASME Summer Heat Transfer Conference 2009, HT2009. p. 415-419 5 p. (Proceedings of the ASME Summer Heat Transfer Conference 2009, HT2009; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • Solution of heat conduction problem in automotive clutch and brake systems

    Al-Shabibi, A. M., 2009, 2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008. p. 321-326 6 p. (2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • The effect of controlled frequency and amplitude of vibration on friction

    Abdo, J. & Al-Yhmadi, A., 2009, Mechatronic Systems and Materials III. Trans Tech Publications Ltd, p. 380-386 7 p. (Solid State Phenomena; vol. 147-149).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    7 Citations (Scopus)
  • 2008

    An ergonomics intervention study of reducing health complaints among office employees

    Shikdar, A., Khadem, M. & Al-Harthy, S., 2008, 2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008. p. 1966-1970 5 p. 4738215. (2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • A quantitative performance measurement regarding reconfigurable manufacturing systems

    Garbie, I. H., 2008, IIE Annual Conference and Expo 2008. p. 734-739 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    5 Citations (Scopus)

  • Design and stability discussion of a hybrid intelligent controller

    Mohammadzaheri, M. & Chen, L., 2008, Proceedings of the 17th World Congress, International Federation of Automatic Control, IFAC. 1 PART 1 ed. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 17, no. 1 PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    2 Citations (Scopus)

  • Evaluating the layout of the emergency department of a public hospital using computer simulation modeling: A case study

    Khadem, M., Bashir, H. A., Al-Lawati, Y. & Al-Azri, F., 2008, 2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008. p. 1709-1713 5 p. 4738164. (2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    23 Citations (Scopus)

  • Intelligent modelling of MIMO nonlinear dynamic process plants for predictive control purposes

    Mohammadzaheri, M. & Chen, L., 2008, Proceedings of the 17th World Congress, International Federation of Automatic Control, IFAC. 1 PART 1 ed. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 17, no. 1 PART 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    3 Citations (Scopus)

  • Managing product development complexities through restructuring information exchange and adopting configuration principle

    Shamsuzzoha, A., Helo, P. & Kekäle, T., 2008, 2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008. p. 1189-1193 5 p. 4738058. (2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)

  • Modeling and simulation for car battery manufacturing for cost effectiveness

    Khadem, M. & Ali, A., 2008, Proceedings of the 11th IASTED International Conference on Intelligent Systems and Control, ISC 2008. p. 50-54 5 p. (Proceedings of the IASTED International Conference on Intelligent Systems and Control).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)
  • 2007

    An approach for testing the feasibility of decomposing interdependent design tasks for concurrent engineering

    Bashir, H., AlZebdeh, K. & Abdo, J., 2007, IEEM 2007: 2007 IEEE International Conference on Industrial Engineering and Engineering Management. p. 973-978 6 p. 4419337. (IEEM 2007: 2007 IEEE International Conference on Industrial Engineering and Engineering Management).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

    1 Citation (Scopus)